Description
Model No: ADSW0003M1
INTRODUCTION
This SPDIF/TosLink Digital Optical Audio 2×2 Matrix can let the two sets of SPDIF output signal source and two SPDIF input device being connected. It can be easily split or switched between two SPDIF signal and two SPDIF signal receiving equipment.
Our devices offer solutions for noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.
FEATURES
Two ways of optical fiber signal input split or switch to two sets of SPDIF/TosLink signal receiving device.
Audio format support: LPCM2.0/DTS/Dolby-AC3
Support signal retiming
Used optical fiber cable loss less the 0.2Db/m, Output distance is up to 30m.
The input control can through R/M and also can directly press the button.
Support last time working state memory when power off.
Over-voltage protection can prevent the damage caused by connecting unmatched power adapter to the machine, if the light for standby indication flashed, it shows that the output voltage from the power adaptor is too high and the adaptor needs to be changed.
Support power on boot and power on standby two modes. (Default is power on mode).
LED status indication, it can tell us the working state of the device very easily.
No loss of quality
Installs in minutes
Need DC5V/1A power supply
Operating and Connecting：
To use the optical fiber cable to connect the optical fiber signal source (such as blue-ray player, the computer and so on) with the matrix input.
To le the matrix output port connected to the optical fiber signal receiver (such as amplifier, home theater and so on) by using the optical cable.
Connect 5V power supply to the matrix DC input port
Through the remote or button to switch the input source freely.
SPECIFICATIONS:
Support audio format = LPCM2.0/DTS/Dolby-AC3
Peak wavelength = 650nm
Max baud rate = 25Mbps
Output cable distance = ≤30m(Use the optical fiber cable loss less the 0.2Db/m )
Max working current = 200mA
Power adapter format = Input: AC (50HZ, 60HZ) 100V-240V; Output: DC5V/1A
Operating Temperature range = (0 to +40℃)
Operating Humidity range = 5 to 90%RH (No Condensation)
Dimension (L x W x H) = 66×178.5×28 (mm)
Weight = 120g
Notes:
Pls use the machine as the instruction listed to keep the long use lifetime of the machine.
The machine should be placed at the spot far from the Damp, High-Temperature, Dusty, Erosive, and oxidative environment.
All parts will be free from the strong shake, hit, fall.
Touching the power adaptor with the wet hands is prohibited.
Pls hold the power adaptor head and do not pull the power cord when cut off from the socket.
Pls turn the power off when the machine is not used for long time.
Pls do not open the cover and do not touch the inside parts.
Pls use the original factory power adaptor.
Before power on, pls check the connection line carefully. And make sure that all interfaces are normally connected. The common trouble shooting way shows below:
|
Serial NO |
Trouble Description |
Cause and Ways to deal with |
|
1 |
Non-Power-Connected |
1、Check if the power adaptor head is truly and correctly inserted the power socket. 2、Check the power switch if it is in on status. |
|
2 |
No sound output |
1、Check the signal receiving equipment and the machine connection are in good condition. 2、To check if the signal source is on and well connected. 3、Check the system connection quality. 4、Check if the line is all good quality. |
|
3 |
Sound interrupted |
1、To try again to connect the cable to be free from the unsuccessful connection. |
STANDARD PACKAGE
ADSW0003M1 Digital Optical Audio 2×2 Matrix
5V Power Adapter
Remote-control
User Manual
1 Year Warranty
