More information on product
Home > Products > SAROWIN > HDMI Converter > SAROWIN HDCRGB0102 HDMI To VGA Converter


Item details
Weight: 380 grams
Stock: Stock available

  Share This   Add To Facebook   Add To MySpace

Model: HDCRGB0102
The HDCRGB0102 Converter Use a single HDMI source, accessing to single  sink or  single YPbPr+SPDIF sink. The Converter allows one HDMI device to be converted easily to one VGA+SPIDF or one YPbPr+SPDIF  Monitor or projector.

Our device offer solutions for noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training enivironment

• One HDMI signal convert to one YPbPr+SPDIF or VGA+SPIDF sink device
• Support video input : HDMI 1.2a
• Support audio output SPDIF (Optical) + R/L analog
• Support output :  Up to UXGA and 1080i (50/60Hz), the same format as input
• HDCP 1.2 protocol compliant
• LED indication : when source or sink is working, LED relative to is light
• No loss of quality
• Install in minutes
• Need DC5V/1A power supply

The accessories with the machines list as picture
1. 5V Power Adaptor
2. One pc of Manual

1. Connect one cable from HDMI1.2 sink inti the Converter input
2.Connect VGA+SPDIF or YPbPr+SPDIF from monitor or projector into Converter outputs
3. Connect 5V power supply to the HDCRBG0102 Converter

- HDMI resolution : HDMI 1.2a
- Video signal input : 0.5-1.5 Volts p-p
- Input DDS signal : 5 Volts p-p(TTL)
- YPbPr+SPDIF output Support up to UXGA and 1080i (60Hz)
- Audio Output : R/L analog and optical
- Max transmission bandwidth : 5.1Gbps
-  Max  working currebt : 600mA
- Power adapter format :  input :AC (50Hz, 60Hz) 100V-240V, Outout: DC5V/1A
- Operating Temperature range … (-15 to 55ºC)
- Operating Humidity range … 5 to 90% RH ( No Condesation)
- Dimension (LxWx H) : 178x65x27(mm)
- Weight : 380g

Please use the machine as the instruction listed to keep the long use lifetime of the machine.
1. The machine should be placed at the spot far from the Damp, High-temperature, Dusty, Erosive, and oxidative enviroment
2. All parts will be free from the strong shake, hit, fall
3. Touching the power adapter with the wet hands is prohibited
4. Please hold the power adapter head and do not pull the power cord when cutt off from the socket
5. Please turn the power off when the machines is not used for long time
6. Please do not open the cover and do not touch the inside part
7. Please use the original factory power adapter

Before power on, please check the connection line carefully. And make sure that all interfaces are normally connected. The common trouble shooting way shows below: